stainless steel Impeller Investment Casting Impeller investment casting 004 manufacturer from China Winnington Casting CO.,LTD

stainless steel Impeller Investment Casting

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: Impeller investment casting...

Stainless steel 1.4517 Impeller investment casting manufactured in PED certificat

Stainless steel 1.4517 Impeller investment casting manufactured in PED certificated foundry.

Quick Detail:

Stainless steel investment casting of a pump impeller;
Material: 1.4517 hardened stainless steel;
Size: 200X200X50mm;
Weight: 3.2kg;
Casting process: silical sol lost wax process;
PED and ISO9001:2008 certificated foundry;
Chemical composition test operated before each casting process;
NDT is available.

Description:

Stainless steel Investment Castings for water solution industries, especially for pump impeller and valve body, pipe fittings. Minimum wall thickness 1.5mm;

Winnington Casting has rich experience casting a wide variety of stainless steel, carbon steel, nickel based alloys. The most common alloys we have poured are listed below:

Stainless Steel (70%)

Carbon Steel(20%)

Alloy Steel(10%)

CF3M (SUS316L), CF8M (SUS 316), CF8 (SUS 304),CD4MCu, CD4MCuN,ANC20,1.4408,1.4517, 1.4306, 303, 430, 420, 17-4PH, SCS1

and more

SCS16, SCS14, SCS13, 1.0619, WCB, S355JR, 1045 , LCC

and more

ANC2,CLA12C,42CrMo,8Q, 7Q, 4140,6150

and more

Specifications:

Standards	ASTM,JIS,DIN,BS,MIL
Maximum Casting Size	500500350mm
Casting weight	10g~80kg
Wall thickness	1.5-2mm Min
Casting process type	silica sol lost wax casting,medium temperature
Machining	CNC machining, CNC lathe
Surface finish	electro polishing, satin, hand polished, pickled, zinc plating, vibratory polishing;
Tolerances	According to VDG P690
Physical performance	Tensile test, Impact test, Hardness test
Chemical component test	Spectrometer
NDT test	Dye test, X ray test etc

Overview of Lost Wax Method

The model of the part is made of wax from an aluminum die, then the wax patterns are welded onto the runner system which is also made of wax - it forms a pattern tree or called pattern assembly. Next, the pattern tree will be dipped into ceramic slurry of sand or stucco, with drying process between each coating until the shell is thick enough to hold the weight of molten metal which will be poured later.

Then the Pattern tree with wax in it is going to a high pressure oven which melt the wax out. It forms a hollow in the shell. The shell is preheated before pouring to help fluidity of melton metal. A sand bed is always aside to hold the hot poured shell.

In the following process, the shell is broken and removed, so the castings can be seen now. The castings are then cut off from the metal tree and shot blast/polished/machined to get better tolerance and surface.

Competitive Advantage:

One-stop Services of Winnington Casting for time and cost saving:

From wax die making, wax injection, pouring, secondary machining, welding, heat treatment, polishing, to surface finishing etc.

Precision casting based on the lost wax method is often preferred because: